New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18 GHz

This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13 g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18 GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18 GHz.     

Recent ICRF coupling experiments on EAST

Recent ion cyclotron resonance frequency(ICRF) coupling experiments for optimizing ICRF heating in high power discharge were performed on EAST. The coupling experiments were focus on antenna phasing and gas puffing, which were performed separately on two ports of the ion cyclotron resonance heating(ICRH) system of EAST. The antenna phasing was performed on the I-port antenna, which consists of four toroidally spaced radiating straps operating in multiple phasing cases; the coupling performance was better under low wave number ∣k_‖∣(ranging from 4.5 to 6.5). By fuelling the plasma from gas injectors, placed as uniformly spaced array from top to bottom at each side limiter of the B-port antenna, which works in dipole phasing, the coupling resistance of the B-port antenna increased obviously.Furthermore, the coupling resistance of the I-port antenna was insensitive to a smaller rate of gas puffing but when the gas injection rate was more than a certain value(1021 s~(-1)), a sharp increase in the coupling resistance of the I-port antenna occurred, which was mainly caused by the toroidal asymmetric boundary density arising from gas puffing. A more specific analysis is given in the paper.     

Thermal analysis and optimization of the EAST ICRH antenna

The ion cyclotron resonance of frequency heating(ICRH) plays an important role in plasma heating.Two ICRH antennas were designed and applied on the EAST tokamak.In order to meet the requirement imposed by high-power and long-pulse operation of EAST in the future,an active cooling system is mandatory to be designed to remove the heat load deposited on the components.Thermal analyses for high heat-load components have been carried out,which presented clear temperature distribution on each component and provided the reference data to do the optimization.Meanwhile,heat pipes were designed to satisfy the high requirement imposed by a Faraday shield and lateral limiter.     

Inkjet-printed patch antenna emitter for wireless communication application

This research focuses on exploring low-cost and rapid production solutions for fabricating emitters for patch antennas for wireless communication applications. Additive manufacturing technique is employed to fabricate two patch antennas using silver nanoparticle ink on FR4 substrate. Finite-element simulation software, HFSS is used to analyse and predict the theoretical performance of the antenna designs for 2.4?GHz MIMO and 6?GHz wireless data transmission. The fabricated antennas have resonant frequencies closely matching the design values. The work provides a viable solution for fabricating emitters and finally antennas commercially using inkjet printing platform, thus overall reducing the cost and simplifying the process.     

Planar array of corrugated tapered slot antennas for ultrawideband biomedical microwave imaging system

A planar antenna array that includes 12 corrugated tapered slot elements for use in ultrawideband (UWB) biomedical microwave imaging systems is presented. The used corrugate tapered slot antenna has a compact size, low profile, moderate gain, and distortionless performance in the time domain. The array is immersed in a carefully designed matching liquid of suitable dielectric constant to improve the matching between the array and the imaged object, and thus, to increase the dynamic range of the imaging system. A suitable platform is designed and fabricated to accommodate the array, breast phantom, and a coupling liquid for the case of UWB breast imaging. The design of the whole system is optimized using trust‐region framework method in the simulation tool CST Microwave Studio. The performance of the designed array is confirmed via measurements in a realistic imaging environment. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

某型空空导弹自毁装置技术研究

本文针对引进的某型空空导弹没有加装自毁（自炸）装置的实际情况,结合目前自毁技术的发展状况,提出了一种先进的单片机自毁技术方案并给出了技术方案中需要解决的几个关键技术问题。     

Annular‐ring slot antenna designs with circular polarization radiation

The design of a microstrip‐fed annular‐ring slot antenna (ARSA) with circular polarization (CP) radiation is initially studied. To obtain CP radiation with broad 3‐dB axial ratio (AR) bandwidth that can cover the WiMAX 2.3 GHz (2305–2320 MHz, 2345–2360 MHz) and WLAN 2.4 GHz (2400–2480 MHz) bands, a novel technique of extending an inverted L‐shaped slot from the bottom section of the annular‐ring is proposed. To suppress the harmonic modes induced by the CP ARSA, the technique of integrating a defected ground structure into the annular‐ring slot is further introduced. From the measured results, 10‐dB impedance bandwidth and 3‐dB AR bandwidth of 44.86 and 9.68% were achieved by the proposed harmonic suppressed CP ARSA. Furthermore, average gain and radiation efficiency of ～4.7 dBic and 71%, respectively, were also exhibited across the bands of interest. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:337–345, 2015.     

Numerical and experimental characterization of antenna positioning in a dual-radio mesh router

This paper investigates the influence of the position of the antennas in a dual-radio mesh router by characterizing the router components from an electromagnetic point of view. Since the behavior of a wireless router equipped with multiple devices and antennas can be affected by mutual coupling among several close conducting bodies, numerical and experimental tests are carried out to provide some suggestions for an accurate positioning of the antennas. A reference configuration is implemented in an electromagnetic Computer-Aided Design (CAD) simulator. The most significant numerical results are validated by performing a campaign of measurements in anechoic chamber and deploying a testbed for the derivation of the experimental values of throughput, return loss, power density, and directivity.     

基于目标联合特征提取的脉冲多普勒引信抗干扰方法

针对脉冲多普勒（PD）引信对抗信息型干扰能力不足的问题,提出一种基于目标联合特征提取的PD引信抗干扰方法。基于信息型干扰下PD引信基带滤波器的输出信号,结合PD引信目标函数,并利用二分类与单分类支持向量机构造引信期望信号空间,设计了基于目标联合特征提取和识别的PD引信原理样机。进行了抗干扰实验验证,结果表明,基于目标联合特征提取的PD引信原理样机抗干扰成功率大于90%,从而可知该方法能够显著提高PD引信抗干扰能力。